产品中心

Energy-Saving and Servo Machine

Energy-saving servo technology is an important breakthrough in the field of hot chamber die casting machine hydraulic drive.By means of the drives double close loops, we can use the servo drive to change speed quickly, so as to realize the change of flow correspondingly.Moreover,the pressure can be adjusted automatically through the output of different torques, which helps to achieve high accuracy, high response and good effect

询盘

Main Features:

The energy saving rate of each shot is very high, 40%-70% higher than the traditional machines.

Servo system can response quickly,and the pressure change between 0 and 100% can reach 30ms.

Servo system can reduce the hydraulic temperature and then reduce the use of cooling water.

Servo system can reduce noise and improve your working environment.

Prolong the working life of hydraulic parts and reduce the cost of maintenance.

 

Water Cooled Type Hydraulic Servo System

Cooling Method:Environmentally Adaptable and Friendly ZL-280 Oil Cooled Type Servo Pump Servo Control System

The flow of single pump is between 8L/min and 500L/min.

The biggest pressure is betwwen 70bar and 350bar.

The system provides comprehensive groups of pressure and flow.

Meets the requirements of designers in all walks of life.

 

Air cooled Type Hydraulic Servo System

Cooling Methof - High Efficiency and good Looking ZL-200 Air Cooled Type Servo Pump

 

Servi Driven System

Single Pump Servo Driven System

Double Pump Servo Driven System

Single Pump Double Pump motor
Pressure Sensor Driver Reactance Brake