English
español
العربية
Русский язык
中文
Energy-Saving and Servo Machine
Energy-saving servo technology is an important breakthrough in the field of hot chamber die casting machine hydraulic drive.By means of the drives double close loops, we can use the servo drive to change speed quickly, so as to realize the change of flow correspondingly.Moreover,the pressure can be adjusted automatically through the output of different torques, which helps to achieve high accuracy, high response and good effect
INQUIRYMain Features:
The energy saving rate of each shot is very high, 40%-70% higher than the traditional machines.
Servo system can response quickly,and the pressure change between 0 and 100% can reach 30ms.
Servo system can reduce the hydraulic temperature and then reduce the use of cooling water.
Servo system can reduce noise and improve your working environment.
Prolong the working life of hydraulic parts and reduce the cost of maintenance.
Water Cooled Type Hydraulic Servo System
 |
 |
 |
| Cooling Method:Environmentally Adaptable and Friendly | ZL-280 Oil Cooled Type Servo Pump | Servo Control System |
 |
The flow of single pump is between 8L/min and 500L/min. The biggest pressure is betwwen 70bar and 350bar. The system provides comprehensive groups of pressure and flow. Meets the requirements of designers in all walks of life. |
Air cooled Type Hydraulic Servo System
 |
 |
| Cooling Methof - High Efficiency and good Looking | ZL-200 Air Cooled Type Servo Pump |
Servi Driven System
Single Pump Servo Driven System
Double Pump Servo Driven System
 |
 |
 |
| Single Pump | Double Pump | motor |
 |
 |
 |
 |
| Pressure Sensor | Driver | Reactance | Brake |